Crosley CR3009A Manuel d'instructions télécharger pdf (Page 8)

Getting Started

AM/FM RADIO

1. Turn the Function Knob to the desired tuning band.

The Power Indicator will turn green to indicate the power

is turned on.

2. Rotate the Tuning Knob to select the desired station.

The Tuning LED will appear brightest when the best signal is

reached. Some weaker but listenable AM stations may not

turn on the Tuning LED.

3. Adjust the volume to the desired level by rotating the Volume Knob.

4. Position the antenna for optimum reception.

PORTABLE AUDIO READY

1. Turn the function knob to “AUX”. Turn the volume to a lower level.

2. Using the supplied male to male mini pin connector, connect

one end to the AUX OUTPUT jack on the back of the unit.

3. Turn on your portable audio device and set the volume

on the device to approximately 10% of full volume.

4. Plug the other end into an output or headphone jack on your

external device.

5. Begin playback on your external device.

Adjust the volume to your desired listening level on your iSOLO.

For more volume, increase the setting on your portable device.

Auxillary OUTPUT

The Auxillary Output feature is designed to let you use your iSOLO

as an audio source for other components.

1. Using the supplied mini pin connector, connect one end to the

OUTPUT JACK (auxiliary output), on the back of your iSOLO.

2. Plug the other end into an auxiliary input jack on the desired

component.

Note: If the desired component does not have a mini pin input

jack, a separate cable will be needed.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Crosley CR3009A Manuel d'instructions Page 8